| || |
An old church dome in Orange, Texas returned to its former glory and got new life as The Center of Stark Cultural Venues, thanks in part to MetalTech-USA, a premier distributor and specialty fabricator of eco-friendly architectural metals.
Nelda C. and H.J. Lutcher Stark Foundation, a private operating foundation to encourage and assist education and to improve and enrich the quality of life in Southeast Texas, purchased the old church to be the center location of all Stark Cultural Venues, in May 2013.
The historic dome became an Orange landmark when erected in 1914 as the worship center for First Baptist Church, originally constructed as a brick building with a 35-foot dome comprised of wooden shingles. Over the past 100 years, the dome underwent several renovations to prevent corrosion and aide in waterproofing but these efforts did not permanently address the issues.
The aluminum clad dome suffered major damage to the exterior over time from several severe storms and hurricanes including Hurricane Rita in2005 and Ike in2008, thus, causing it to leak and creating water damage to the interior. The plans to renovate were to render the structure water tight as well as changing the existing appearance of the dome to resemble the original 1914 design.
The dome exterior was updated with 2,000 square feet of RHEINZINK 0.8mm prePATINA blue-grey zinc. MetalTech-USA fabricated the preweathered zinc Flatlock system, installed in a square diamond orientation along the dome surface, to resemble the 1914 shingle design. The transition from Flatlock diamond tile, which makes up about 90% of the lower portion of the dome, to a Standing Seam system at the apex of the dome not only added waterproofing but also visual interest. RHEINZINK material in roofing applications can last between 80-100 years due to its natural, protective patina derived from the combination of water, carbon dioxide and oxygen. Unlike most metals, this zinc layer, insoluble in rainwater, will hinder any further exchanges between oxygen and zinc protecting it from further corrosion.
“The MetalTech Flatlock panel system is perfect for designs with curved surfaces; allowing the panel to naturally adapt to the substrate as it is installed using our pre-notched clip detailing with concealed fasteners,” says Eric Simonsen, MetalTech-USA Vice President of Project Management and Design Support. “The dome was segmented into 8 wedges so that a uniform panel size and shape could be used and keep all courses of panels square.”
Installation of the MetalTech-USA Flatlock Tile system was completed by Competition Roofing, Inc. of Houston, Texas.
With its completed new look and watertight system, the dome will remain the historical landmark for several centuries to come.
MetalTech-USA is a premier distributor and specialty fabricator of eco-friendly architectural metals, specializing in roofing, rainwater, soffit and cladding systems. MetalTech utilizes natural architectural metals for their sustainability, low maintenance, building envelope longevity, and decreasing life cycle costs. For more information, visit www.metaltech-usa.com, or call 770-486-8825.